Ohio Pure Water Company :: Commercial Water Softeners :: Fleck 2900 2" Duplex Systems

System 5 - Meter Immediate (Interlock, 2-4 valves)

This is a 2 to 4 unit system, each unit having a meter and all in service. Only one unit is allowed in regeneration at a time. A unit regenerates immediately when the available volume of treated water drops to zero and no other unit is in regeneration.

System 6 - Meter Immediate (Series, 2-4 valves)

This is a 2 to 4 unit system, with one meter for the entire system and all in service. When the entire system volume of treated water drops to zero, it requests the first unit to go into regeneration. Then, when the first unit is done regenerating, the second follows, and so on.

System 7 - Meter Immediate (Alternating, 2 valves)

This is a 2 unit system, with one meter for the entire system and only one unit in service. When the volume of treated water drops to zero for the unit in service, it requests regeneration. This causes the unit in standby to move to service. Then the unit requesting regeneration moves to standby and begins regeneration.

The Installer of any of our commercial / industrial systems, is completely responsible for insuring that all parts of the unit, required to successfully assemble and install the system, are received with the order, and that all parts are installed per typical installation procedures for that unit.

If there is a shortage of any part needed for successful assembly of the unit, the installer should contact Ohio Pure Water Company immediately so the missing part can be located and sent out, for complete and proper assembly of the unit.

In addition, we assume no responsibility for the assembly and installation of these commercial systems, as the Installer of the unit is completely responsible, and should have the proper qualifications and knowledge to assemble, install and program the units, for proper operation.

A Fleck Service Manual is supplied with all orders, which fully explains the programming and operation of the Fleck valve and system.

If the installer is not clear on the programming or operation of the valve or system, and requires a more detailed explanation, we suggest the installer contact a local water treatment vendor, to arrange for an onsite visit, who can explain the programming and operation of their system, once the installation is complete. Any charges incurred for this onsite visit, will be the complete responsibility of the person making the appointment for this visit.

Fleck 2900 2" Duplex Systems

Fleck 2900 2" NT System 5 Duplex  Fleck 2900 2" NT System 6 Duplex  Fleck 2900 2" NT System 7 Duplex