Pro Ban T (Citric Acid) is specially formulated to effectively lower pH and remove iron and other contaminants from fouled water softeners. Ban T should be used as preventative maintenance on all water softeners in areas with moderate iron content to maintain the life of the softener. Ban T is an environmentally friendly cleaning agent that removes hard water deposits, lime scale and moderate iron staining from household fixtures.

Pro-Softener Mate is a unique blend of environmentally friendly chemicals formulated to remove limited iron, manganese, metal particles and organic compounds that cause water softeners to lose efficiency.  It's a total softener treatment that eliminates the need to use water softener salt that contains costly additives.  Every softener should use Pro-Softener Mate as part of a routine maintenance program.  Regular use with regular water softener salt promotes efficient performance.

Pro-Rust Out chemically removes iron and rust build-up that coats the resin beds and fouls the softener. This iron build-up is not totally removed during normal regeneration of a water softener. Using Pro-Rust out in a water softener will eliminate rust and foreign matter from the resin bed. This increases the life of the softener and reduces rust staining on household fixtures and other surfaces. Use regularly as preventative maintenance to ensure the softening and recharging efficiency of the softener's resin bed.

Pro-Res Care - Chemically clean a fouled resin bed of a water softener and restore the exchange capacity of the resin.  Most types of water softening resins can become fouled with iron and other contaminants that will affect the performance of the ion exchange system.  Iron fouling can cause channeling, pressure drop, loss of capacity, hardness and iron leakage.  Regular use of Pro-Res Care will minimize fouling and extend the resin life in the water softener.

Oxidizers,  Lowering pH  &  Sequestering agents for Iron/Manganese

Pot Perm - Used for automatic regeneration of Manganese Greensand iron filters.

Pro-Soda Ash - Is a highly alkaline compound which neutralizes the acid found in some water systems.  This helps eliminate corrosion from piping, pressure tanks, water heaters and fixtures, giving your system longer life.  A Pro-Soda Ash solution injected into your water system through a chemical feed pump, will neutralize acid water and eliminate corrosion problems.  Pro-Soda Ash can also be used to remove tannins from a tannin-type water softener and may be used in a potable water system.

Pro-Poly - Pro-Poly sequesters iron and manganese to reduce or eliminate iron staining in potable water, irrigation systems and other areas where unsightly iron staining is to be prevented.  Pro-Poly also helps prevent or retard corrosion through the water system, and can be used in the treatment of potable water.  This formulation holds the dissolved iron in solution, keeping the water clear, and thus preventing iron staining.Typically applied through a chemical feed pump.

Household Cleaners

Pro Liquid Rust Out - Pro-Liquid Rust Out is an easy way to remove rust and iron stains.  The spray dissolves the rust, which is then easily removed with water.  It is effective even on the toughest stains, but is much safer than traditional liquid rust removers.  Pro-Liquid Rust Out easily cleans rust from tubs, sinks, tile, toilets, brick, stone, concrete, siding, etc.  It is also a safe, effective way to remove stains from white and colorfast clothing and carpet.

Lime Out (Tub & tile) - Non-abrasive liquid used to dissolve lime, rust, soap and other buildups caused by minerals in the water. Can be used in a variety of places.

White Brite (formerly Yellow Out and Laundry Whitener) - Additive designed to remove rust, yellowing and dinginess caused by aging and by the iron in your water supply.